{"id":133,"date":"2019-05-20T12:35:57","date_gmt":"2019-05-20T12:35:57","guid":{"rendered":"http:\/\/ftp08.epgpbooks.inflibnet.ac.in\/?post_type=chapter&p=133"},"modified":"2019-05-21T06:34:46","modified_gmt":"2019-05-21T06:34:46","slug":"packaging-of-dairy-products-ii","status":"publish","type":"chapter","link":"https:\/\/ebooks.inflibnet.ac.in\/ftp08\/chapter\/packaging-of-dairy-products-ii\/","title":{"rendered":"Packaging of Dairy Products – II"},"content":{"raw":"
\"epgp<\/a>\r\n<\/span><\/div>\r\n
\r\n\r\n \r\n\r\n19.1 Introduction<\/strong>\r\n\r\n \r\n

In this module, we will discuss regarding the packaging of butter, ghee, cheese and milk powder. Butter and ghee contains a high percentage of fat, so they are very susceptible to spoilage. So packaging material used should be selected in such a way that it possesses good grease resistance, and barrier properties against oxygen and moisture. Cheese is fermented dairy product, having low pH and comparative higher moisture content while milk powder is dried product, containing very low moisture.<\/p>\r\n \r\n\r\n19.2 Butter<\/strong>\r\n\r\n \r\n

It consists primarily of about 80% milk fat, 16% moisture and in table butter up to 3% common salt. Because of high moisture content butter is susceptible to mold growth and lypolytic rancidity<\/p>\r\n \r\n\r\n19.2.1 Characteristics of Butter<\/strong>\r\n

    \r\n \t
  1. Due to high moisture content butter unlike solid fats is susceptible to mold growth.<\/li>\r\n \t
  2. Flavour and odour are easily absorbed by butter from its environment.<\/li>\r\n \t
  3. Deterioration of the butter may take place due to rancidity.<\/li>\r\n \t
  4. Butter has tendency to lose Moisture.<\/li>\r\n<\/ol>\r\n \r\n\r\n19.2.2 Requirement of Packaging<\/strong>:\r\n
      \r\n \t
    1. Non toxic, not harmful to consumer\u2019s health.<\/li>\r\n \t
    2. It should be grease\/moisture proof.<\/li>\r\n \t
    3. Shall be barrier for Oxygen.<\/li>\r\n \t
    4. Low metallic content as metals favor oxidation of fat.<\/li>\r\n \t
    5. Shall not transmit light.<\/li>\r\n<\/ol>\r\n \r\n\r\n19.2.3 Packaging Material<\/strong>\r\n\r\n \r\n

      In India, butter is packed in bulk as well as in retail packages. For bulk packaging, there is no standard method, and generally polyethylene bags\/parchment paper along with corrugated boxes are used.<\/p>\r\n \r\n

      Al-foil\u00a0 0.09\u00a0 mm\u00a0 thick,\u00a0 surface\u00a0 treated\u00a0 with\u00a0 lacquer\u00a0 for\u00a0 protecting\u00a0 against\u00a0 corrosion:\u00a0 Al foil\/parchment or glassine paper (40-42 gsm): PVC or cardboard with a parchment insert can be used.<\/p>\r\n \r\n

      Indian Standard 2034 - 1961 gives specifications for tin cans of 200 g and 400 g capacity that are to be used for package of butter. They specify tinplate thickness of 0.24 mm and 0.27 mm respectively and minimum tin coating of 17 g\/m2, besides many other requirements. Though tinplate containers are the best for product protection, owing to their high cost very little quantity of butter is packed in the tin containers. Flexible packaging materials like vegetable parchment paper or grease proof paper, aluminum foil, and paper board cartons which together give similar protection to the product are more commonly used.<\/p>\r\n \r\n

      Indian Standard 7161 - 1973 gives specifications for vegetable parchment paper or Grease Proof paper\/ Aluminum foil laminate for wrapping butter. As vegetable parchment paper has good wet strength, generally paper of 45 gsm and above and aluminum foil above 0.009 mm thickness are used. As butter is highly susceptible to foreign odour, care must be exercised while choosing adhesive and printing inks used in the manufacture of the laminates.<\/span><\/p>\r\n \r\n

      Cartons protect butter while handling after packaging in primary Wrapper, in the distribution system. Since butter is stored in the refrigerator, cartons may be waxed with about 10 gsm wax on each side though it is not mandatory. Paperboard can be extrusion coated with PP. Injection-moulded pots and tubs of PP can also be used for packaging of the butter.<\/span><\/p>\r\n\r\n<\/div>\r\n

      \r\n\r\n \r\n

      High-impact polystyrene or HIPS is also used in multilayer sheet extrusion with a variety of other polymers, like PE, PP, PET, PVDC and EVOH.<\/p>\r\n \r\n

      Large packs of 10, 20 and 50 kg butter are packed formerly in wooden barrels\/boxes or parchment paper lined corrugated boxes. For better handling, easier storage, more efficient use of storage space and economy Fibre board boxes are introduced which are lined with parchment paper.<\/p>\r\n \r\n

      Latest packaging material that are being used are Shallow, 1-2 mm thick Al-foil trays with heat sealable PVDC-cellophane or other suitable barrier material. Aluminum PVDC\/PS cups can also be used for butter. Butter chiplets are packed in lacquered Aluminum foil. The standards for vegetable parchment paper used for the butter packing are:<\/p>\r\n \r\n\r\nGrammage: 41-45\r\n\r\nBursting strength: 1.8 \u00b1 0.2 kg\/cm2\r\n\r\nWet strength: 0.8 \u00b1 0.2 kg\/cm2\r\n\r\nGrease resistance: Should pass the turpentine oil test\r\n\r\nAcidity: 0.02% as H2SO4\r\n\r\npH of H2O extract: not less than 5.0\r\n\r\nBrightness: 79.\r\n\r\n \r\n\r\n19.3 Ghee<\/strong>\r\n\r\n \r\n

      It is usually 100 per cent fat with little moisture (< 0.3 %), obtained by boiling butter at 1100C till all water is evaporated with a grainy texture and a characteristic flavour.<\/p>\r\n \r\n

      The product needs to be protected from chemical spoilage and rancidity caused by oxygen, light, heat, moisture and metal ions.<\/p>\r\n \r\n\r\n19.3.1 Characteristics of Ghee<\/strong>\r\n

        \r\n \t
      1. Easy to absorb flavour from its environment<\/li>\r\n \t
      2. Easily prone for oxidation<\/li>\r\n \t
      3. Prone for adulteration.<\/li>\r\n<\/ol>\r\n \r\n\r\n19.3.2 Requirements of Packaging Material<\/strong>\r\n
          \r\n \t
        1. fat resistance<\/li>\r\n \t
        2. Barrier properties against oxygen and moisture.<\/li>\r\n \t
        3. It shall be temper proof.<\/li>\r\n<\/ol>\r\n \r\n\r\n19.3.3 Packaging Material<\/strong>\r\n\r\n \r\n

          A major portion of ghee is packed in lacquered tinplate containers of capacities ranging from 200 ml to 15 litres \/ kilograms. Since the product is very sensitive to oxygen, the tinplate containers are filled to the brim without any air gap. Ghee packed in tinplate containers is fairly stable and has a shelf-life of about one year.<\/span><\/p>\r\n \r\n

          Alternate packages, which are plastic based, are now gradually replacing tins. For shorter shelf-life, 200 ml, 500 ml and 1 litre capacity pouches made of polyethylene film, multi\u2013layer co-extruded films of LDPE\/HDPE are used, which are economical. Aluminium foil laminate standby pouches are also commonly used for packaging ghee.<\/span><\/p>\r\n\r\n<\/div>\r\n

          \r\n\r\n \r\n\r\nFor long \u2013 term storage, stainless steel containers or tinplate cans are desirable. Ghee is also marketed in lined cartons with flexible laminated plastics as inner liner materials and in tetrapaks. In both these packs long shelf-life is achieved. Laminated pouches of metallized polyester based films are also used. Generally, plastic pouches are filled on automatic FFS machines. However, if the sealing surface is contaminated with the product, sealing of the pouch becomes difficult.\r\n\r\n \r\n

          Recently, it is packed in certain laminates and Bag - in - Box containers which comprises of a pre-sealed bag made of polyethylene and polyamide laminates fitted with a spout and cap housed in a CFB \/ Duplex board box. The bag consists of two plies which is sealed together on all four sides and the spout and cap assembly is heat sealed onto it. The bag is vacuum filled and inserted manually into the box. Seven layer Nylon containing self standing pouch with closure is also used. A laminate of HDPE \/ LDPE is used for packing ghee.<\/p>\r\n \r\n

          Another form is consisting of a multi-ply collapsible bag with a tap which can be housed in a rigid outer container. The container can be a box, a crate or a drum whose capacity varies between 3 and 200 liters. The bags and boxes are in collapsible form.<\/p>\r\n \r\n\r\n19.4 Cheese<\/strong>\r\n\r\n \r\n

          Cheese is enzymatically coagulated and fermented dairy product, having pH between 5.0 to 5.5 and contains around 35 to 80% moisture depending on the type of cheese. Hence, it is prone to mold growth on the surface.<\/p>\r\n \r\n\r\n19.4.1 Packaging material<\/strong>\r\n\r\n \r\n

          Any material to be used for packaging natural cheese must give general protection, prevent moisture loss, improve appearance, protect against micro organisms and prevent oxygen transmission.<\/p>\r\n \r\n

          Cheese is essentially a product with high fat and moisture content. Therefore, package used for cheese should prevent oxidation and mould growth. It should also have fat and grease resistance and be able to protect against micro organisms. Oxygen is eliminated by packing cheese in hermetically sealed containers in vacuum or inert gas atmosphere. Processed cheese is usually packed in aluminum foil in cubes with different shapes. Tinplate cans are used for 200 g and above quantity. PVDC coated plastic films are suitable for cheese packaging as they provide good oxygen and moisture barrier properties.<\/p>\r\n \r\n

          Cream cheese is packed in foil lined card board boxes of heat stable plastic packs. Saran is used as wrapping material for Neufchatel cheese. Air evacuation and gas flushing is used for cottage cheese, green cheese is packed by waxing and paraffining or alternatively vacuum packed in polyethylene. Ripened cheese is packed in laminated cellophane film. Cheese consumer packs\u00a0are generally consists of Lacquered metal cans of laminated consisting of Nylon \/ PVDC Copolymer or polyster\/ PVDC copolymer or Nylon \/ Polyethylene copolymer.<\/span><\/p>\r\n \r\n

          Processed cheese is packaged hot metallic containers. Wax coated cellophane, aluminum foil, polypropylene, PE, PVDE material is also used for packing processed cheese.<\/span><\/p>\r\n\r\n<\/div>\r\n

          \r\n\r\n \r\n\r\n19.5 Milk Powder<\/strong>\r\n\r\n \r\n

          The shelf life of a dehydrated product is influenced to a large extent by the packaging, which must conform to certain special criteria.<\/p>\r\n \r\n\r\nThese are:\r\n